Here are my comments:
Crowdfunding model was used for all below tests.
- Flashed SD, booted, left it unattended for ~1hr - HESTIAPI SSID could not be found. Rebooted by pressing the button. HESTIAPI SSID could not be found at least while the provisioning screen was shown. Reflashed same SD, retried, worked fine straight away. Some short of racing condition?
- Touchscreen, same as before, has coordinates/scaling mixed up making it impossible to reach any button
- WiFi disconnections. Leaving HestiaPi running overnight ended up being offline in the morning. I will leave a ping running in the background to 1.1.1.1 and see if this changes anything
- HVAC: testing thoroughly all functions showed no issues
- EU: Hot water and Humidity control (dehumidify mode) relays could not be activated with ON or Boost (while Heating works fine)
2026-03-03 06:59:08.049 [INFO ] [.eclipse.smarthome.model.script.mode] - Humidity mode changed from OFF to ON
2026-03-03 06:59:08.069 [INFO ] [.eclipse.smarthome.model.script.mode] - HumidityPrevMode changing from OFF to ON
2026-03-03 06:59:08.836 [INFO ] [ipse.smarthome.model.script.humidity] - Turning ON the Dehumidify: curr humidity = 50.0 setpoint = 43 mode = ON
2026-03-03 06:59:09.353 [INFO ] [.eclipse.smarthome.model.script.pins] - Commanding Pin18 to ON for HumidityPin
…
2026-03-03 07:00:10.266 [INFO ] [.eclipse.smarthome.model.script.mode] - HotWater mode changed from OFF to ON
2026-03-03 07:00:10.342 [INFO ] [.eclipse.smarthome.model.script.mode] - HotWaterPrevMode changing from OFF to ON
2026-03-03 07:00:10.706 [INFO ] [ipse.smarthome.model.script.hotwater] - Turning ON the hot water: mode = ON
2026-03-03 07:00:11.372 [INFO ] [.eclipse.smarthome.model.script.pins] - Commanding Pin12 to ON for HotWaterPin